Come on, Listen How to Make Helicopter from Used Goods

Helicopter toys

Creativity makes helicopter toys from used bottles.
Children often have an aspiration to become a pilot when they grow up. Not infrequently children also want to have a toy or miniature aircraft that they like. One of the most common aircraft types chosen by them is a fighter or helicopter.

Toys or miniature aircraft or helicopters of various shapes, materials and detai. But for those of you who want to encourage and shape the creativity of children, you can do the following creative steps to create a helicopter-shaped toy using materials that you often encounter.

The materials needed are:

Bottled drinking bottles
Ice cream stick
Used dynamo
Used cables
Square-shaped battery
Glue or Glue
Scissor
Cutter Knives
Tang
Lego Toys (if necessary)
How to make it as follows:

Separate the bottle head with the bottle body by cutting it on the neck of the bottle. Then cut the part of the bottle body into two parts. The part to be used is the top bottle body. Trim the pieces using scissors to make a flat piece. Helicopter game helicopter helicopter game helicopter
Glue the ice cream sticks with glue on the edges hinga shaped like a board. Ice cream sticks used in accordance with the size of the bottle body used, to cover the open part of the back. In the example above, the number of eskrim sticks required six pieces.
Measure Stick eskrim in accordance with the shape of the bottle, then cut. To make it easier to cut, mark the ice cream stick with a ballpoint pen / marker. Then glue the toy helicopterdengta to close with neatly the back of the bottle.
Next, connect two ice cream sticks with glue to form the foundation of the tail of the helicopter, then paste in the middle. Take four more ice cream sticks and scissor one of the edges to get a flat side. Connect one by one eskrim sticks at each corner of the helicopter body support the foundation of the tail. Glue firmly to helicopter
Take two stick and cut both ends of the stick to get a flat surface. After flattening, cut into two parts of each ice cream stick. Take two more ice cream sticks to paste with the pieces. Glue vertically as shown on the image to form a helicopter foot. Use two more ice cream sticks to trim the sides of the helicopter
The next stage, take the battery to take the electrical conductor to be associated with other batteries that will later be used as a source of helicopter.
Take the dynamo then connect with the cable. Use two dynamos to place each on the body and tail. Set the cable groove to keep it from looking annoying. Connect the dynamo cable to be a series, then paste it with the electrical conductor that was taken from the first battery. Make sure the cable is connected neatly.
Paste the battery on the bottom of the helicopter body. Helicopter helicopter helmet
Next, grab the bottle cap and gouge on two sections until it is diagonal to become the main vane. Take the stick and paste it on the cut section of the diagonal. Do it again on the next side. Then use a smaller bottle cap to cover the side of the first open bottle cap.
After that take the ice cream stick with a larger shape to be attached to the propeller. Next stick with the dynamo on the top of the helicopter body. Take an ice cream stick and cut it into two parts. Take one of these parts and glue it with the glue on the armature part of the tail section of the helicopter

The helicopter was finished and ready to be played. If you want to refine the look of the helicopter you have made, you can use the lego toys to add on the inside of the helicopter. Helicopter stuff